Processor, Removing the heat sink and processor, 10 processor – Dell Precision T1600 (Early 2011) User Manual
Page 29
Advertising
10
Processor
Removing The Heat Sink And Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
3.
Disconnect the heat sink/fan assembly cable from the system board.
4.
Use a Phillips screwdriver to loosen the captive screws securing the heat sink/fan
assembly to the system board.
5.
Lift the heat sink/fan assembly upward gently, and remove it from the system. Lay
the assembly with the fan facing downward, and with the thermal grease facing
upward.
29
Advertising