Dell U2715H Monitor - Manual (Page 25)

Setting Up the Monitor |
25
Connecting the black DisplayPort (DP to DP) cable
Connecting the monitor for DP Multi-Stream Transport (MST)
function
NOTE: U2715H supports the DP MST feature. To make use of this feature, your
PC Graphics Card must be certified to DP1.2 with MST option.
The default out of factory setting in the U2715H is DP1.1a.
To enable MST connection, please use only DP cable as provided in box (or other
DP1.2 certified cable) and change the DP setting to DP1.2 by performing the below
steps:
A) Monitor is able to show content
1. Use OSD button to navigate to Display Settings.