Dell U2715H Monitor - Manual (Page 41)

Operating the Monitor |
41
DP 1.2 Press to enable or disable DP 1.2.
To use the DP MST (Daisy Chain) or HBR2 feature, enable
DP 1.2.
NOTE: Ensure your Graphics Card can support these
features before selecting DP 1.2. Wrong setting may result
in blank screen. Some Graphics Cards do not support
MCCS (Monitor Control Command Set) at DP 1.2. In these
cases, DDM (Dell Display Manager) may not run.
Reset Display
Settings
Select this option to restore default display settings.
Energy
Energy Use Dell U2715H
Brightness / Contrast
Input Source
Color
Display
Energy
Menu
Other
Personalize
Power Button LED
USB
Reset Energy Settings
Off During Standby
On During Active
Maximum: 2560x1440, 60Hz Resolution: 1920x1080, 60Hz
Power Button
LED
Allows you to set the power LED indicator On During
Active or Off During Active to save energy.
USB Allows you to enable or disable USB function during
monitor standby mode.
NOTE: USB on/off under standby mode is only available
when the USB upstream cable is unplugged. This option
will be greyed out when the USB upstream cable plugs in.
Reset Energy
Settings
Select this option to restore default Energy Settings.