Dell U2715H Monitor - Manual (Page 31)

Setting Up the Monitor |
31
Removing the Cable Cover
1
2
1. Press the tab on the cable cover.
2. Remove the two tabs on the bottom part of the cable cover from the groove on
the back of the monitor.
Wall Mounting (Optional)
Apparatets sƟkprop skal ƟlsluƩes en sƟkkontakt med jord, som giver forbindelse Ɵl sƟkproppens jord CAN ICES-3 (B)/NMB-3(B) Consumo de energía: XX.X Wh Consumo de energía en modo de espera: X.XX Wh Удельная мощность рабочего режима - X.XXX Вт/см² Потребляемая мощность изделием в режиме ожидания - X.XX Вт Потребляемая мощность изделием в выключенном режиме - X.XX Вт Q40G027N-700-06A
4 XXXXX
U2715Hc
XXXXXXX-XXXXX
MSIP-REM-TPV-U2715Hc
080-854-0066 TPV Electronics (Fujian) Co., Ltd. 㐔㷡㢬ڕ
㥐㦤㣄ڕٻ TOP VICTORY ELECTRONICS (FUJIAN) CO., LTD.
Apparatets sƟkprop skal ƟlsluƩes en sƟkkontakt med jord, som giver forbindelse Ɵl sƟkproppens jord CAN ICES-3 (B)/NMB-3(B) Consumo de energía: XX.X Wh Consumo de energía en modo de espera: X.XX Wh Удельная мощность рабочего режима - X.XXX Вт/см² Потребляемая мощность изделием в режиме ожидания - X.XX Вт Потребляемая мощность изделием в выключенном режиме - X.XX Вт Q40G027N-700-06A
4 XXXXX
U2715Hc
XXXXXXX-XXXXX
MSIP-REM-TPV-U2715Hc
080-854-0066 TPV Electronics (Fujian) Co., Ltd. 㐔㷡㢬ڕ
㥐㦤㣄ڕٻ TOP VICTORY ELECTRONICS (FUJIAN) CO., LTD.
S/N: CN-0JMMT2-64180-36D-001S
REV A00
DELL
Flat Panel Monitor /Monitor Plano Panel /Moniteur écran plat
⏢Ღ亟⽪ಘ /⏢Ღᱮ⽪ಘ/모니터 Model No. /Modelo /ර㲏/රਧ/모델명: U2715Hc
䕨ޕ䴫Ⓚ : Ӕ⍱䴫༃100-240Կ⢩, 1.5ᆹษ, 50/60䎛㥢 䗃ޕ⭥Ⓚ /정격입력: 100-240V 50/60Hz 1.5A
X X X X X X - X X
The equipment must be connected to an earthed mains socket-outlet. L'appareil doit être branché sur une prise de courant munie d'une mise à la terre. Raheen Business Park Limerick Ireland www.dell.com Made in China /Fabricado en China /ѝ഻㼭䙐/ѝഭࡦ䙐/중국에서 만든 Q40G027N-700-05A
䝕 Manufactured Date: May. 2014
⭕ӝᰛᵕ : May. 2014 ⭕⭘ᰛᵕ : May. 2014 제조년월 : 5월. 2014
Service Tag:1NGTQV1
Express SVC code:359 576 607 77
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable, flat table.
2. Remove the stand.
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall by following the instructions that comes with the
wall mounting kit.
NOTE: For use only with UL-listed wall mount bracket with minimum weight/
load bearing capacity of 4.91 kg.