Heat sink and processor, Removing the heat sink and processor – Dell OptiPlex 380 (Late 2009) User Manual
Page 25
Advertising
Back to Contents Page
Heat Sink and Processor
Dell™ OptiPlex™ 380 Service Manual—
Small Form Factor
Removing the Heat Sink and Processor
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Loosen the screws that secure the heat sink to the system board.
3. Rotate the heat sink towards the back of the computer and remove the heat sink.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising