Power supply, Removing the power supply – Dell OptiPlex 380 (Late 2009) User Manual
Page 35
Advertising
Back to Contents Page
Power Supply
Dell™ OptiPlex™ 380 Service Manual—
Small Form Factor
Removing the Power Supply
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the
optical drive
.
3. Disconnect the processor power cable from the system board.
4. Remove the processor power cable from its routing guides on the chassis.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising