I/o panel, Removing the i/o panel – Dell OptiPlex 380 (Late 2009) User Manual
Page 28
Advertising
Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 380 Service Manual—
Small Form Factor
Removing the I/O Panel
1. Follow the procedures in
Before Working Inside Your Computer.
2. Remove the
system board
.
3. Remove the
fan
.
4. Press the clips on either sides of the air temperature sensor and remove it from the computer chassis.
5. Remove the mounting screw that secures the I/O panel to the computer.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising