Ethernet/snmp configuration – Dell PowerVault 35F (Fibre Channel Bridge) User Manual
Page 29

Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]
NOTE: If you do not see messages on your screen, re-check your computer’s serial port settings and press Enter
five or six times. In particular, make sure the baud rate is set to one of the values listed in
The default boot mode is 1) Operational Mode and will be automatically selected if you wait three seconds. The main
menu appears next:
The main menu allows for various operations to be performed on the PowerVault 35F.
NOTE: Menus are not case sensitive. You can enter uppercase and lowercase characters interchangeably when
selecting from menus.
Ethernet/SNMP Configuration
If you select 1) Ethernet/SNMP Configuration from the main menu, you will see the following menu: