Dell PowerVault 35F (Fibre Channel Bridge) - Manual (Page 4)

Safety Instructions: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/safety.htm[3/21/2013 11:16:17 AM]
GBIC being used meets all of the above requirements. If the GBIC is not certified then this product’s laser safety
certification becomes null-and-void.
Certifications include one or more of the following:
Recognized Component by Underwriters Laboratories
Certified by the Canadian Standard Association
Certified by VDE (Germany) and/or Certified by Statens Provningsanstalt (SP) in Sweden
The following shows the Class 1 information label specified in IEC 825 and CENELEC HD 482 51. This label is
attached to this product.
Class 1 Laser Product
Laser Klasse 1
Luckan 1 Laserlaite
The following information provides the typical operational parameters for the Optical Laser GBIC included with the
PowerVault 35F.
Laser Information
Parameter Shortwave Longwave
Nomenclature 100-M5-SN-I 100-SM-LC-L
Spectral Centre
Wavelength 770-850nm 1300nm
Operating Range 2m-500m 2m-10km
Launch Power Max 1.3 dBm -3 dBm
Launch Power Min -7 dBm
Receive Power Min -13 dBm -20 dBm
Receive Power Max 1.3 dBm -3 dBm
Extinction Ratio 6 dB 9 dB
TX Deterministic Jitter 20 ps 20 ps
Fibre Diameter 50um 9um
Class Multimode Single-mode
Nominal Bit Rate 1062.5
Mbaud 1062.5 Mbaud
OFC none none
NOTE: Class 1 Laser Products are not considered hazardous.
Product Information
Each Fibre Channel communications port consists of a transmitter and receiver optical subassembly. The transmitter
subassembly contains internally a semiconductor laser diode in the wavelength of 780 or 1300 nanometers.