Dell Inspiron 1525 (Late 2007) - Manual (Page 15)

Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ Inspiron™ 1525/1526 Service Manual
Removing the Processor Thermal-Cooling Assembly
1. Follow the instructions in Before You Begin .
2. Turn the computer over.
3. Remove the eight captive screws securing the back cover and remove the module cover.
4. In sequential order, loosen the five captive screws securing the processor thermal-cooling assembly to the system board, then carefully lift the
processor thermal-cooling assembly out of the computer.
Replacing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1 module cover 2 captive screws (8)
1 captive screws (5) 2 processor thermal-cooling assembly