Button board, Removing the button board, Replacing the button board – Dell Inspiron 1525 (Late 2007) User Manual
Page 7
Back to Contents Page
Button Board
Dell™ Inspiron™ 1525/1526 Service Manual
Removing the Button Board
1.
Follow the procedures in
Before You Begin
.
2.
Remove the center control cover (see
Removing the Center Control Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Disconnect the button board cable from the system board.
5.
Gently pry up the button board from the securing tabs starting from the top left corner.
Replacing the Button Board
1.
To replace the button board, remove the palm rest (see
Removing the Palm Rest
).
2.
Connect the button board cable to the system board.
3.
Place the button board in position and gently press until the button board secures within the tabs.
4.
Replace the keyboard (see
Replacing the Keyboard
).
5.
Replace the center control cover (see
Replacing the Center Control Cover
).
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
1
button board
2
button board cable