Charger board, Removing the charger board – Dell Inspiron 1525 (Late 2007) User Manual
Page 49
Charger Board
Removing the Charger Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove all memory module (see
Removing Memory Module
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
4.
Remove the optical drive (see
Removing the Optical Drive
).
5.
Remove all Mini-Cards (see
Removing Mini-Card
).
6.
Remove the center control cover (see
Removing the Center Control Cover
).
7.
Remove the keyboard (see
Removing the Keyboard
).
8.
Remove the display assembly (see
Removing the Display Assembly
).
9.
Remove the internal card with Bluetooth wireless technology, if installed (see
Removing the Internal Card With Bluetooth® Wireless Technology
).
10.
Remove the palm rest (see
Removing the Palm Rest
).
11.
Remove the ExpressCard cage (see
Removing the ExpressCard Cage
).
12.
Remove the processor thermal-cooling assembly (see
Removing the Processor Thermal-Cooling Assembly
).
13.
Remove the processor (see
Removing the Processor Module
).
14.
Removing the System Board Assembly
).
15.
Remove the two screws securing the charger board to the system board assembly.
16.
Carefully disconnect the charger board connector from the system board and seperate charger board from the system board assembly.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1 screws (2)
2 charger board connector
3 charger board 4 system board