Dell Latitude C610 - Manual (Page 48)

NOTE: You cannot exit standby mode or hibernate mode by pressing a key or touching the touch pad.
NOTE: Some PC Cards may not operate correctly after the computer exits hibernate mode. Remove
and reinsert the card, or simply restart (reboot) your computer.
To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate
mode.
For more information on hibernate mode, see the documentation that came with your operating system.
Power Options Properties (Power Management
Properties)
To access the Windows Power Options Properties (or Power Management Properties) window:
In Windows XP
Click the Start button, and then click Control Panel. 1.
Under Pick a category, click Performance and Management. 2.
Under or pick a Control Panel icon, click Power Options. 3.
In Windows 98 or Windows 2000
Open the Control Panel window. 1.
Double-click the Power Options (or Power Management Properties) icon. 2.
Power Schemes Tab
The Power schemes pull-down menu displays the selected preset power scheme. Depending on your
operating system, typical options are:
NOTE: Dell recommends that you use the Portable/Laptop power scheme to maximize battery
power.
Portable/Laptop
Home/Office
Always On