If you drop or damage your computer – Dell Latitude C610 User Manual
Page 87
2.
Ground yourself by touching one of the metal connectors on the back of the computer.
3.
Remove the
module bay
device and any installed
PC Cards
, and put them in a safe place to dry.
4.
Remove the
battery
.
5.
Wipe off the battery and put it in a safe place to dry.
6.
Remove the
hard drive
.
7.
Remove the
memory modules
.
8.
Open the display and place the computer right-side up across two books or similar props to let air
circulate all around it. Let the computer dry for at least 24 hours in a dry area at room temperature.
9.
NOTICE:
Do not use artificial means, such as a hair dryer or a fan, to speed the drying process.
CAUTION:
To help prevent electrical shock, verify that the computer is thoroughly dry
before continuing with the rest of this procedure.
Ground yourself by touching one of the metal connectors on the back of the computer.
10.
Replace the memory modules.
11.
Replace the hard drive.
12.
Replace the module bay device and any PC Cards you removed.
13.
Replace the battery.
14.
Turn on the computer and verify that it is working properly.
15.
If the computer does not start, or if you cannot identify the damaged components, contact Dell.
If You Drop or Damage Your Computer
Save and close any open files, exit any open programs, and shut down the computer.
1.
Disconnect the AC adapter from the computer and from the electrical outlet.
2.
Turn off any attached external devices, and disconnect them from their power sources and then from
the computer.
3.
Remove and reinstall the battery.
4.
Turn on the computer.
5.
If the computer does not start, or if you cannot identify the damaged components, contact Dell.