Dell Dimension 4400 - Manual (Page 46)

Diskette Configuration Submenu
Event Log Configuration Submenu
Maximum Capacity Displays the maximum capacity of the primary IDE device.
LBA Mode Control Displays whether LBA mode control is enabled or not on the primary IDE device.
Multi-Sector
Transfers Displays the multi-sector transfer setting of the primary IDE device.
PIO Mode Displays the PIO mode setting of the primary IDE device.
Ultra DMA Displays the ultra DMA setting of the primary IDE device.
Cable Detected Displays the type of cable connected to the primary IDE device.
Option Function
Diskette Controller Configures the floppy drive interface. Options are Enabled (default) and Disabled.
Diskette A Selects the floppy drive type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44/1.25 MB 3 1/2", or 2.88 MB 3
1/2".
Diskette Write
Protect Protects a floppy disk from being written to when set to Enabled. When this option is set to Disabled (default), the floppy disk is not
protected unless the write-protect tab is in place.