Boot, Exit, Screen – Dell Dimension 4400 User Manual
Page 49: Boot screen, Exit screen
Boot Screen
Exit Screen
Computer stays off when power is restored; you must press the power button to turn on the computer.
l
Power On
Computer turns on when power is restored.
Wake on PME
Determines what state the computer enters when a PCI Power Management Enable wake-up event occurs. Settings are Power On
and Stay Off (default).
Option
Function
Quiet
Boot
Enabled (default) displays the Dell logo during POST. Disabled displays the normal POST messages.
Quick
Boot
When set to Enabled, this option shortens POST by eliminating some tests. If set to Disabled (default), all POST tests occur.
The system setup program automatically checks the configuration of a Simple Boot Flag-compatible operating system at POST. Depending on its
configuration, the system setup program may automatically set this option to Enabled or Disabled.