Dell Latitude D630 - Manual (Page 13)

Save and exit MEBx and then boot the computer to the Microsoft® Windows® operating system.
Intel AMT in Static Mode Settings Example
The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer in static mode. The computer
requires two MAC addresses (GBE MAC address and Manageability MAC Address) to operate in static mode. If there is no Manageability MAC address, Intel
AMT cannot be set in static mode.
Save and exit MEBx and then boot computer to the Microsoft® Windows® operating system.
MEBx Default Settings
The table below lists all the default settings for the Intel® Management Engine BIOS Extension (MEBx).
Intel ME Platform Configuration Default Settings
Intel AMT Configuration Default Settings
SOL/IDE-R
l Enable SOL
l Enable IDE-R
Remote FW Update Enabled
Intel AMT Configurations Example in Static Mode
Intel AMT Configuration Parameters Values
Intel AMT Configuration Select and press <Enter>
Host Name Example: IntelAMT
TCP/IP
Set the parameters as follows:
l Enable Network interface
l Disable DHCP Mode
l Set an IP address (e.g., 192.168.0.15)
l Set a subnet mask (e.g., 255.255.255.0)
l The default gateway address is optional
l The preferred DNS address is optional
l The Alternate DNS address is optional
l Set the domain name (for example., amt.intel.com)
Provision Model
l Intel AMT 2.6 Mode
l Small Business
SOL/IDE-R
l Enable SOL
l Enable IDE-R
Remote FW Update Enabled
Password admin
Intel ME Platform State Control 1
Enabled *
Disabled
Intel ME Firmware Local Update
Enabled
Disabled*
Intel ME Features Control
Manageability Feature Selection
None
Intel AMT *
ASF
Intel ME Power Control
Intel ME ON in Host Sleep States
Mobile: ON in S0*
Mobile: ON in S0, S3/AC
Mobile: ON in S0, S3/AC, S4-5/AC
Mobile: ON in S0;ME WoL in S3/AC
Mobile: ON in S0; ME WoL in S3/AC, S4-5/AC
Host Name
TCP/IP
Disable Network Interface? N
DHCP Enabled. Disable? N
Domain Name blank 2
Provisioning Server
Provisioning Server Address 0.0.0.0
Port Number (0 -65535) 0
Provision Model
AMT 2.6 Mode N
Set PID and PPS **
Set PID and PPS ** PPS Format: 1234-ABCD-1234-ABCD-1234-ABCD-1234-ABCD
Un-Provision 3
SOL/IDE-R