Dell Latitude D630 - Manual (Page 14)

*Default setting
**May cause Intel AMT partial unprovision
1 Intel ME Platform State Control is only changed for Management Engine (ME) troubleshooting.
2 In Enterprise mode, DHCP automatically loads the domain name.
3 Un-provision setting only seen if the box is provisioned.
Back to Contents Page
Username & Password
Disabled
Enabled *
Serial Over LAN
Disabled
Enabled *
IDE Redirection
Disabled
Enabled *
Secure Firmware Update
Disabled
Enabled *
Set PRTC blank
Idle Timeout
Timeout Value (0x0 -0xFFFF) 1