Access panel, Removing the access panel, Replacing the access panel – Dell Latitude E6410 User Manual
Page 15
Back to Contents Page
Access Panel
Dell™ Latitude™ E6410/E6410 ATG Service Manual
Removing the Access Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ATG Port Cover
(applicable on E6410 ATG computer only).
3.
Remove the
battery
.
4.
Loosen the captive screw that secures the access panel to the base of the computer.
5.
Slide the access panel toward the front of the computer.
6.
Lift and remove the access panel off of the computer.
Replacing the Access Panel
To replace the access panel, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.