System board, Removing the system board, Replacing the system board – Dell Latitude E6410 User Manual

Page 48

Advertising
background image

Back to Removing and Replacing Parts

System Board

Dell™ Latitude™ E6410/E6410 ATG Service Manual

Removing the System Board

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove the

ATG port cover

(applicable on E6410 ATG computer only).

3.

Remove the

battery

.

4.

Remove the

SIM card

.

5.

Remove the

SD card

.

6.

Remove the

ExpressCard

.

7.

Remove the

Smart card

.

8.

Remove the

hinge covers

.

9.

Remove the

access panel

.

10.

Remove the

optical drive

.

11.

Remove the

hard drive

.

12.

Remove the

LED cover

.

13.

Remove the

keyboard

.

14.

Remove the

coin-cell battery

.

15.

Remove the

memory

.

16.

Remove the

WWAN card

.

17.

Remove the

WLAN card

.

18.

Remove the

Latitude ON™ Flash/CMG module

.

19.

Remove the

Fingerprint Reader

.

20.

Remove the

Heat Sink and Processor Fan

.

21.

Remove the

Display Assembly

.

22.

Remove the

palm rest

.

23.

Disconnect the power connector from the system board.

24.

Disconnect the smart card reader and IEEE 1394 cables from system board.

25.

Remove the screws that secure the system board to the computer.

26.

Starting in the back right corner and separate the system board from the I/O board connector.

27.

Lift the back edge of the system board until all the connectors on the left side are separated and slide the system board towards the rear and remove
from the computer.

Replacing the System Board

To replace the system board, perform the above steps in reverse order.

Back to Removing and Replacing Parts

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE:

You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.

Advertising
This manual is related to the following products: