CDA HVN 32 - Manual (Page 10)

10
OR
Afterheat in Cooking Zone/s
When switching off a cooking zone (power level
0
), if
the temperature of the zone is too warm to be touched
the display will show alternately "
H
" and "
0
".
Whenever the touch control is switched off, the residual
heat is shown by a static "
H
".
Avoid touching the hob surface over the cooking area.
Please pay special attention to children.
It is still possible to start cooking again; just set the
required power level.
"
H
" is turned OFF when the cooking zone temperature
drops below a preset temperature.
Cooking zone
power level
Front zone
Watt power
Rear zone
Watt power
1
75 W 100 W
2
150 W 200 W
3
300 W 300 W
4
400 W 500 W
5
500 W 700 W
6
600 W 900 W
7
800 W 1100 W
8
1000 W 1600 W
9
1400 W 2200 W
Power Ignition and Adjustment of a Cooking Zone
To turn ON a cooking zone the touch control must be
switched ON (see section “
How To Turn the Touch Control
ON and OFF”).
Press the key and keep it pressed until the desired power
level, ranging between
1
and
9
is set.
As an alternative, press the key . The choice starts from
level
9
(maximum level) down to
1
(minimum level).
To reset the power level press the key and keep it pressed
until power level zero (
0
) or alternatively press the keys
and at the same time.