CDA HVN 32 - Manual (Page 17)

17
TIPS FOR INSTALLATION
Installation
CAUTION:
This appliance shall only be serviced by authorised personnel.
– This appliance is to be installed only by an authorised person according to the current local
regulations and in observation of the manufacturer’s instructions.
– Incorrect installation, for which the manufacturer accepts no responsibility, may cause
personal injury of damage.
– Always disconnect the cooktop from mains power supply before carrying out any
maintenance operations or repairs.
WARNING !
– We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150 °C to avoid delamination.
– The appliance must be housed in heat resistant units.
– The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.
490
50
(1)
275
300
51
0
A
Fig. 3
(1): at least 50 mm between the back side of the
cut-out and the back of the countertop.
A
50 mm
from top of countertop
to bottom metal cover
68 mm
from top of countertop
to terminal block