Dell XPS M1210 (MXC062, Mid 2006) User Manual
Page 126
Advertising
126
Adding and Replacing Parts
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on
the card and on the system board, and realign the card.
6 Install the replacement WLAN card:
a
Insert the WLAN card connector into the system board connector at a 45-degree angle, and then
press the other end of the WLAN card down into the securing tabs until the card clicks into place.
1
metal securing tabs (2)
1
Advertising