Dell XPS M1210 (MXC062, Mid 2006) - Manual (Page 30)

30
Setting Up Your Computer
Connecting a USB Printer
NOTE:
You can connect USB devices while the computer is turned on.
1 Complete the operating system setup if you have not already done so.
2 Attach the USB printer cable to the USB connectors on the computer and the printer. The USB
connectors fit only one way.
3 Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window
appears, click Cancel.
4 Install the printer driver if necessary. See the documentation that came with your printer.
Power Protection Devices
Several devices are available to protect against power fluctuations and failures:
• Surge protectors
• Line conditioners
• Uninterruptible power supplies (UPS)
1 USB connector on
computer 2 USB printer cable 3 connector on printer
2
1
3