Configuring the paper trays – Dell 1700/n Mono Laser Printer User Manual
Page 15
Pr e p a r i n g t h e Pr i n t e r
1 5
Configuring the Paper Trays
NOTE: You must first install the drivers for your printer before configuring the paper trays. See
"Setting Up for Local Printing" on page 29 or "Setting Up for Network Printing" on page 37.
Dell Laser Printer 1700/1700n
1
Launch the Dell Local Printer Settings Utility (Start
→
Programs
→
Dell Printers
→
Dell
Laser Printer 1700
→
Dell Local Printer Settings Utility).
2
Select your Dell Laser Printer 1700.
3
Click OK.
4
In the left column, click Paper.
5
In the right column, go to the Tray 1 section. Specify what size and type of media you
loaded into tray 1.
6
In the right column, go to the Tray 2 section. Specify what size and type of media you
loaded into tray 2.
7
On the Menu Bar, click Actions
→
Apply Settings.
8
Close the utility.
NOTE: If you change the size or type of media loaded into either tray, use the Local Printer
Settings Utility to reconfigure the tray.
9
To update your printer options, follow the instructions in the table.
Windows XP
1
Click Start
→
Control Panel
→
Printers and Other Hardware
→
Printers and
Faxes.
2
Right-click the Dell Laser Printer 1700 icon.
3
Click Properties
→
Installed Options
→
Ask Printer.
4
Click
OK
→
OK. Close the Printers folder.
Windows 2000
Windows NT 4.0
1
Click Start
→
Settings
→
Printers.
2
Right-click the Dell Laser Printer 1700 icon.
3
Click Properties
→
Installed Options(or Options)
→
Ask Printer (or Update
Now).
4
Click OK
→
OK. Close the Printers folder.