Dell 1700/n Mono Laser Printer - Manual (Page 19)

Pr e p a r i n g t h e Pr i n t e r 1 9
NOTE: Memory options designed for other printers may not work with your printer.
5 Unpack the memory card.
NOTICE: Memory cards are easily damaged by static electricity. Touch something metal, such
as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
6 Align the notches on the bottom of the card with the notches on the connector.
7 Push the memory card firmly into the connector until the latches on either end of the
connector snap into place.
It may require some force to fully seat the card.
8 Make sure each latch fits over the notch on each end of the card.
9 Close the side cover.
10 Close the rear exit.
11 Close the front cover.