Removing the input/output panel, Installing the input/output panel, 10 removing the input/output panel – Dell Vostro 360 (Late 2011) User Manual
Page 33
Advertising
10
Removing The Input/Output Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
.
3.
Remove the
.
4.
Remove the
5.
Remove the
.
6.
Remove the I/O panel away from the chassis.
Installing The Input/Output Panel
1.
Place the system board shield on the chassis.
2.
Tighten the screws to secure the system board shield.
3.
Install the I/O panel securely on the system board shield.
4.
Install the
5.
Install the
.
6.
Install the
.
7.
Follow the procedures in
After Working Inside Your Computer
33
Advertising