Dell Vostro 360 (Late 2011) - Manual (Page 77)

28
Removing The Display Panel
NOTE: The touch-control board and the cable are a part of the Display Panel
assembly.
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the rear cover .
3. Remove the rear stand .
4. Remove the rear I/O cover .
5. Remove the rear stand cover .
6. Remove the middle frame .
7. Remove the system board shield .
8. Remove the hard drive cage and the hard drive .
9. Remove the optical drive .
10. Remove the CPU fan .
11. Remove the CPU heatsink .
12. Remove the system board .
13. Remove the speakers .
14. Remove the speaker cover .
15. Remove the front bezel .
16. Remove the LVDS cable .
17. Remove the tempan .
18. Remove the screws from each side and remove the display brackets.
77