Dell 2350d/dn Mono Laser Printer - Manual (Page 36)

4.
When the setting you want appears on the display, press the Select button to save the setting. 5.
Finishing Mode Main Menu
From this
menu: You can:
Sides
(Duplex) Enable duplex (2-sided) printing.
1 sided*
2 sided
Duplex
Binding Define the way duplexed pages are bound and how the printing on
the back of the page is oriented in relation to the printing on the
front of the page.
Long Edge*
Short Edge
Copies Specify a default number of copies for each print job.
1*–999
Blank Pages Define whether blank pages are inserted in a print job.
Do Not Print*
Print
Collate Stack the pages of a print job in sequence when printing multiple
copies.
On-Prints the entire job the number of times specified by the
Copies menu item. For example, if you set Copies to 2 and
send three pages to print, the printer prints page 1, page 2,
page 3, page 1, page 2, page 3.
Off*-Prints each page of a job the number of times specified
by the Copies menu item. For example, if you set Copies to 2
and send three pages to print, the printer prints page 1, page
1, page 2, page 2, page 3, page 3.
Separator
Sheets Specify whether blank separator sheets are inserted.
None*
Between Copies
Between Jobs
Between Pages
Separator
Source Specify the paper source for separator sheets.
Tray <x>*
MP Feeder
NOTE: From the Paper menu, Configure MP must be set to Cassette
in order for MP Feeder to appear as a menu setting.
N-up Specify that multiple-page images be printed on one side of a sheet
* Factory default setting