Dell 2350d/dn Mono Laser Printer - Manual (Page 59)

engages the print media too soon and likely skews the print job.
NOTE: Do not exceed the maximum stack height by forcing paper or specialty media under the
stack height limiters which are located on the guides.
1.
Adjust the paper guides to the print media's width. 2.
Prepare the print media for loading.
Flex sheets of paper or paper labels back and forth to loosen them. Do not fold or crease the
paper or labels. Straighten the edges on a level surface.
NOTE: Avoid touching the print side of the transparencies. Be careful not to scratch them.
3.