Hardware troubleshooter – Dell Inspiron Mini 10 (1012, Late 2009) User Manual

Page 47

Advertising
background image

45

Using Support Tools

No boot device available — No bootable

partition on hard drive, the hard drive cable is

loose, or no bootable device exists.

If the hard drive is your boot device, ensure

that the cables are connected and that the

drive is installed properly and partitioned as

a boot device.
Enter system setup and ensure that the boot

sequence information is correct (see the Dell

Technology Guide available on your hard

drive or at support.dell.com/manuals).

No timer tick interrupt — A chip on the system

board might be malfunctioning or motherboard

failure. Contact Dell (see “Contacting Dell” on

page 64).

Hardware Troubleshooter

If a device is either not detected during

the operating system setup or is detected

but incorrectly configured, you can use the
Hardware Troubleshooter to resolve the

incompatibility.
To start the Hardware Troubleshooter:

Click

1.

Start

Help and Support.

Type

2.

hardware troubleshooter in

the search field and press <Enter> to start

the search.
In the search results, select the option that

3.

best describes the problem and follow the

remaining troubleshooting steps.

Advertising