Dell Latitude L400 - Manual (Page 26)

20 Dell Latitude L400 Service Manual
7. Remove the four black M2 x 4-mm screws across the top of the computer
(see Figure 15).
Figure 15. Removing the Palmrest Assembly Top Screws
8. Remove the three silver M2 x 6-mm screws in the keyboard-assembly
area that secure the middle of the palmrest assembly to the bottom case
(see Figure 15).
9. Disconnect the status lights flex cable from the ZIF connector on the
system board.
10. Disconnect the touch pad flex cable from the ZIF connector on the system
board.
11. Carefully remove the palmrest assembly from the bottom assembly.
M2 x 4-mm screws (4 black)
palmrest
assembly
M2 x 6-mm screws
(3 silver)
status lights
flex cable
touch pad
flex cable