Main battery release latch, Figure 24. main battery release latch removal – Dell Latitude L400 User Manual

Page 38

Advertising
background image

32

Dell Latitude L400 Service Manual

One of the M2 x 3.5-mm screws passes through the hard-disk drive EMI
clip (see Figure 23).

9. Reinstall the audio EMI shield.

a. Carefully position the audio EMI shield so the section with the

two-sided tape is over the USB connector housing.

b. Press the audio EMI shield down so it attaches to the USB connector

housing.

c. Reattach the EMI adhesive sponge across the thermal cooling solution.

10. Reinstall the two IDE connector screws at both ends of the IDE (modular

bay) connector located on the back of the bottom case assembly.

11. Reinstall the four 5-mm socket screws for the VGA and parallel ports

located on the back of the bottom case assembly.

12. Replace the audio I/O cover.

13. Replace the two M2 x 4-mm screws to secure the audio I/O cover to the

bottom case assembly.

14. Reinstall the palmrest assembly.

15. Reinstall the keyboard assembly.

16. Reinstall the display assembly.

17. Reinstall the keyboard bezel.

Main Battery Release Latch

Figure 24. Main Battery Release Latch Removal

main battery release latch

tension spring

release button

bottom case assembly

Advertising