Bottom assembly, Figure 17. bottom assembly – Dell Latitude L400 User Manual

Page 28

Advertising
background image

22

Dell Latitude L400 Service Manual

2. Remove the display assembly.

3. Remove the keyboard assembly.

4. Remove the palmrest assembly.

5. Remove the three M2 x 3.5-mm screws that secure the touch pad

assembly to the palmrest assembly (see Figure 16).

6. Slide the touch pad assembly out from under the two hold-down tabs.

7.

Remove the touch pad assembly from the palmrest assembly.

8. Disconnect the flex cable from the ZIF connector on the back of the touch

pad (see Figure 16).

The flex cable remains attached to the touch pad holder assembly.

Bottom Assembly

Figure 17. Bottom Assembly

The bottom assembly consists of the following field-replaceable components:

Reserve battery

Main battery

Modem

Fan assembly

Speaker

System board assembly

Main battery release latch

Bottom case assembly

reserve
battery

fan

main battery
compartment

system board assembly

bottom
case cover

main battery release
latch location

modem

speaker (shown with audio
EMI shield removed)

Advertising