Dell PowerEdge SC1435 - Manual (Page 62)

62
Installing System Components
Figure 3-15. Control Panel Removal and Installation
Installing the Control Panel
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
5 Place the new control panel board in the system and secure it with the two Phillips screws. See
Figure 3-15.
The front edge of the board fits under the three L-shaped tabs on the chassis.
6 Connect the control panel cable to the control panel board.
7 Close the system. See "Opening and Closing the System" on page 38.
8 Reconnect the system to the power source and turn on the system and attached peripherals.
1 control panel cable 2 control-panel circuit board
securing screws (2) 3 control panel circuit board
4 tabs (3)
2
3
1
4
3