Dell S300w Projector - Manual (Page 36)

36 Using Your Projector
INPUT SELECT
The Input Select menu allows you to select your projector’s input source.
A UTO S OURCE —Select Off (the
default) to lock the current
input signal. If you press the
Source button when the Auto
Source mode is set to Off, you
can manually select the input
signal. Select On to auto detect
the available input signals. If
you press the Source button
when the projector is on, it
automatically finds the next
available input signal.
VGA-A—Press to detect VGA-A signal.
VGA-B—Press to detect VGA-B signal.
S-V IDEO —Press to detect S-Video signal.
C OMPOSITE V IDEO —Press to detect Composite Video signal.
HDMI—Press to detect HDMI signal.
Multiple Display—Press to activate Input Select Multiple Display menu.
NOTE: The Multiple Display can be used after "Wireless / Network" turn on.
Default is Disable.
A DVANCED —Press to activate Input Select Advanced menu.
Input Select Multiple Display
The Input Select Multiple Display menu allows you to activate Wireless Display,
USB Display and USB Viewer.
Wireless Display—Press to access the projector's Wireless Guide screen. See