Dell S300w Projector User Manual
Page 47
Advertising
Using Your Projector
47
3 After the IP Address, Subnet Mask, Gateway and DNS is set up, select Store
and press the
button to store the settings.
4 If select Store without press enter button, the system will keep in the original
setting.
W
IRELESS
—Default is Connect. Select Disconnect to disable the wireless
connection to use LAN networking only.
NOTE:
It is recommended to use the default settings for Wireless Connect.
R
ESET
—Press
to reset network configuration.
INFORMATION
The Information menu displays the current projector settings.
Advertising