Dell S300w Projector - Manual (Page 49)

Using Your Projector 49
S CREEN S ETTINGS — Select and press to activate screen settings. The screen
settings menu consists of the following options:
C
APTURE
S
CREEN
— Select and press to capture the screen display, the
following message appears on the screen.
NOTE: To capture a full image, ensure the input signal that is
connected to the projector is 1280 x 800 resolution.
S CREEN — Select Dell to use the Dell logo as wallpaper. Select Captured to
set the captured image as wallpaper.
R ESET — Select and press to delete the captured picture and set back to
the default setting.
A
UDIO
S
ETTINGS
— Select and press to change audio settings. The audio
settings menu consists of the following options:
A UDIO I NPUT — Select the Audio input source, options are: Audio-A, Audio-
B, HDMI and Microphone.
V OLUME — Press to decrease the volume and to increase the volume.
S PEAKER — Select On to enable speaker. Select Off to disable speaker.
M UTE — Allows you to mute the sounds for audio input and audio output.