Dell PowerEdge C6220 II - Manual (Page 36)

36
FILE LOCATION: D:\Projects\User
Guide\Server\Dell\C6220II\BMC\C6220II_BMC_HOM_section1.fm
NOTE: BMC event log “Processor #0x1c” or “Processor #0x1d” clarification:
This event is generated from Intel CPU ME (Management Engine). There are two
factors that can cause this event to be triggered, one cause is the processor is hot
and the second cause is the system board has received a power throttling signal
from the chassis controller. You can check the throttling settings if you do not want
to do power throttling.
Trap Settings
Select the Trap Settings submenu to view and manage the Simple Network
Management Protocol (SNMP) trap events.
Apply Changes Button Use this button to apply the changes.
Table 1-21. Trap Settings
Items Description
IPv4 Destination List
Enable Checkbox Enables or disables an IPv4 destination address. You can
enable up to four IPv4 destination addresses.
IPv4 Address Configure up to four IPv4 addresses.
Table 1-20. Platform Event Filters
Items Description