Dell Latitude 2100 (Mid 2009) - Manual (Page 24)

Back to Contents Page
Display Bezel
Dell™ Latitude™ 2100 Service Manual
Removing the Display Bezel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery from the computer.
3. Remove the keyboard from the computer.
4. Remove the access panel from the computer.
5. Remove the display assembly from the computer.
6. Using a plastic scribe, pry up and remove the four rubber screw covers from the bezel.
7. Remove the four screws that secure the display bezel to the display assembly.
8. Starting with the top edge of the display bezel, carefully pry away the edge of the display bezel from the center of the display assembly.
9. Remove the display bezel from the display assembly.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.