Dc power cable, Removing the dc power cable – Dell Latitude 2100 (Mid 2009) User Manual
Page 32
Back to Contents Page
DC Power Cable
Dell™ Latitude™ 2100 Service Manual
Removing the DC Power Cable
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
keyboard
from the computer.
4.
Remove the
access panel
from the computer.
5.
Disconnect the DC power cable from the system board.
6.
Remove the screw that secures the DC power cable connector to the system board.
7.
Lift up and remove the DC power cable from the computer.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.