Dell UltraSharp 34 Curved Monitor - Manual (Page 9)

About Your Monitor | 9
Back View
* It is recommended to use this port for your wireless USB device whenever possible.
Back view with monitor stand
Label Description Use
1 VESA mounting holes
(100 mm x 100 mm -
behind attached VESA
Cover) Wall mount monitor using VESA-compatible wall
mount kit (100 mm x 100 mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Releases stand from monitor.
4 Security lock slot Secures monitor with security lock (security lock
not included).
5 Barcode serial number
label Refer to this label if you need to contact Dell for
technical support.
6 USB downstream port* Connect your USB device to this USB charging
port, which supports fast current charging
capability if the device is BC1.2 compatible. You
can only use this connector after you have
connected the USB cable to the computer and USB
upstream connector on the monitor.
7 Cable management slot Use to organize cables by placing them through
the slot.