Dell Inspiron 14z (N411z, Late 2011) - Manual (Page 21)

Hard-Drive Assembly 21
Replacing the Hard-Drive Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the replacement hard drive from its packaging. Save the packaging
for storing or shipping the old hard drive.
3 Align the screw holes on the hard-drive bracket with the screw holes on the
hard drive.
4 Replace the four screws that secure the hard-drive bracket to the hard
drive.
5 Place the hard-drive assembly in the computer base.
6 Using the pull-tab, slide the hard-drive assembly into the connector on the
system board.
7 Replace the four screws that secure the hard-drive assembly to the
computer base.
8 Replace the module cover. See "Replacing the Module Cover" on page 16.
1 hard drive 2 hard-drive bracket
3 screws (4)
3
2
1