Replacing the palm-rest assembly – Dell Inspiron 14z (N411z, Late 2011) User Manual
Page 38
38
Palm-Rest Assembly
Replacing the Palm-Rest Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the palm-rest assembly with the slots on the computer
base and gently snap the palm-rest assembly in place.
3 Slide the power button, touchpad, and hot-key board cables into the
respective connectors on the system board and press down the connector
latches to secure the cables.
4 Replace the seven screws that secure the palm-rest assembly to the
computer base.
5 Replace the keyboard. See "Replacing the Keyboard" on page 33.
6 Turn the computer over and replace the nine screws that secure the
palm-rest assembly to the computer base.
7 Follow the instructions from step 5 to step 6 in "Replacing the Optical
8 Replace the module cover. See "Replacing the Module Cover" on page 16.
1
palm-rest assembly
1