Dell Inspiron 14z (N411z, Late 2011) - Manual (Page 94)

94 System Setup Utility
Advanced
• Intel SpeedStep - This field enables or
disables the Intel SpeedStep mode of the
processor.
• Virtualization - When enabled, a VMM can
utilize the additional hardware capabilities
provided by Vanderpool Technology.
• Integrated NIC - Enables/disables the on-
board LAN controller.
• USB Emulation - Enables/disables the
system's basic input/output system (BIOS)
controls USB keyboards and mice.
• USB PowerShare - Enables/disables charging
USB devices when system is off.
• USB Wake Support - Allows you to enable
USB devices to wake the system from standby.
This feature is only functional when the AC
power adapter is connected. If the AC power
adapter is removed before standby, the BIOS
will remove power from all of the USB ports to
conserve battery power.
• SATA Operation - Two modes are available:
AHCI Mode ATA Mode
• Adapter Warnings - Choose if the system
must display warning messages when you use
certain power adapters. The system displays
these messages if you attempt to use a power
adapter that has too little capacity for your
configuration.
• Function Key Behavior - Allows you to
configure function key behavior.
• Charger Behavior - Enable/disable charger
behavior.
Advanced (Miscellaneous
Devices)
• External USB Ports - Enable/disable external
USB ports