Replacing the system board, Procedure, Postrequisites – Dell Inspiron 14R (5421, Early 2013) User Manual

Page 49

Advertising
background image

Replacing

the

System

Board |

49

Replacing the System Board

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After work
ing inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. Fo
r additional safety best practices
information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

NOTE: Your computer’s Service Tag is stored in the system board. You must enter

the Service Tag in the system setup after you replace the system board.

Procedure

1

Replace the thermal-cooling assembly. See "Replacing the Thermal-Cooling
Assembly" on page 52.

2

Turn the system board over.

3

Ease the system-board ports into the slots on the computer base and align the
screw hole on the system board with the screw hole on the computer base.

4

Replace the screw that secures the system board to the computer base.

5

Connect the power-adapter-port cable and speaker cable to the
system-board connectors.

6

Slide the I/O-board cable into the system-board connector and press down on the
connector latch to secure the cable.

7

Adhere the display cable to the fan.

8

Slide the display cable into the system-board connector and press down on the
connector latch to secure the cable.

9

Adhere the tape to the system-board connector.

Postrequisites

1

Replace the coin-cell battery. See "Replacing the Coin-Cell Battery" on page 38

2

Replace the palm-rest. See "Replacing the Palm-Rest" on page 35.

3

Replace the keyboard. See "Replacing the Keyboard" on page 20.

4

Replace the wireless Mini-Card. See "Replacing the Wireless Mini-Card" on page 30.

5

Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 27.

6

Replace the memory module(s). See "Replacing the Memory Module(s)" on page 24.

7

Replace the base cover. See "Replacing the Base Cover" on page 22.

8

Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16
.

9

Replace the battery. See "Replacing the Battery" on page 13.

book.book Page 49 Tuesday, November 27, 2012 12:06 PM

Advertising