Dell Inspiron 14R (5421, Early 2013) - Manual (Page 64)

64 | Replacing the Display Hinges
Replacing the Display Hinges
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the display hinges with the screw holes on
the display back-cover.
2 Replace the screws that secure the display hinges to the display back-cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 61.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 58.
3 Follow the instructions from step 3 to step 9 in "Replacing the System Board" on
page 49.
4 Replace the palm-rest. See "Replacing the Palm-Rest" on page 35.
5 Replace the keyboard. See "Replacing the Keyboard" on page 20.
6 Replace the base cover. See "Replacing the Base Cover" on page 22.
7 Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16.
8 Replace the battery. See "Replacing the Battery" on page 13.
book.book Page 64 Tuesday, November 27, 2012 12:06 PM