Dell Inspiron 14R (5421, Early 2013) - Manual (Page 62)

62 | Removing the Display Hinges
Removing the Display Hinges
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery. See "Removing the Battery" on page 12.
2 Follow the instructions from step 1 to step 2 in "Removing the Optical Drive" on
page 14.
3 Remove the base cover. See "Removing the Base Cover" on page 21.
4 Remove the keyboard. See "Removing the Keyboard" on page 17.
5 Remove the palm-rest. See "Removing the Palm-Rest" on page 31.
6 Follow the instructions from step 1 to step 8 in "Removing the System Board" on
page 46.
7 Remove the display assembly. See "Removing the Display Assembly" on page 56.
8 Remove the display bezel. See "Removing the Display Bezel" on page 59.
book.book Page 62 Tuesday, November 27, 2012 12:06 PM