Removing an expresscard or blank, To remove the blank, see – Dell Latitude 120L User Manual
Page 18
The computer recognizes the ExpressCard and automatically loads the appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the floppy disk or CD that came with the ExpressCard.
Removing an ExpressCard or Blank
Press the latch and remove the card or blank. For some latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the
card out.
Save a blank to use when no ExpressCard is installed in a slot. Blanks protect unused slots from dust and other particles.
NOTICE:
Use the ExpressCard configuration utility (click the
icon in the taskbar) to select a card and stop it from functioning before you remove it
from the computer. If you do not stop the card in the configuration utility, you could lose data.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.