Replacing the battery-connector board, Procedure, Post-requisites – Dell Inspiron 17 (5748, Mid 2013) User Manual
Page 52: Replacing the battery- connector board
Replacing the Battery-
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the battery-connector board with the screw
holes on the computer base.
2 Press the battery-connector board down into position.
3 Replace the screws that secure the battery-connector board to the
computer base.
Post-requisites
1
Replace the
.
2 Replace the
.
3 Follow the procedures from step 4 to step 5 in replacing the
4 Follow the procedures from step 3 to step 5 in replacing the
5 Replace the
6 Replace the
.
52